VESPA P200E (1977-1982) Specs, Performance & Photos
Maintained by:
Segment: Scooter
Production years: 1977, 1978, 1979, 1980, 1981, 1982
2 Photos
The Vespa series was the last of the classic Vespas to come out of Piaggio`s factories. On the P everything was bigger, the frame was a newly designed.
VESPA P200E 1977-1982
VESPA P200E 200
| engine specs | Type: | Single cylinder, two stroke | Displacement: | 198 cm3 | Bore X Stroke: | 2.6x2.2 in OR 66 mm | Compression Ratio: | 9.8:1 | Horsepower: | 5/5700 KW(hp)/RPM | Torque: | 0/- lb-ft/RPM OR 0 Nm/RPM | Fuel System: | Carburetor |
|---|
| transmission specs | Gearbox: | 4-Speed | Clutch: | Wet Multi-plate | Primary Drive: | - | Final Drive: | Direct drive |
|---|
| chassis specs | Frame: | Pressed sheet steel with streamlined monocoque structure | Front Suspension: | Coil spring with hydraulic shock absorber | Rear Suspension: | Coil spring with hydraulic shock absorber | Front Brake: | Drum | Rear Brake: | Drum |
|---|
| dimension specs | Overall Length: | 69.3 in OR 1760 mm | Overall Width: | 27.4 in OR 696 mm | Seat Height: | - | Wheelbase: | 48.6 in OR 1234 mm | Ground Clearance: | 8.9 in OR 226 mm | Weight: | 260 lbs OR 118 kg | Fuel Capacity: | 2.1 gallons OR 7.9 L |
|---|
| tyres specs | Front: | 3.5x10 | Rear: | 3.5x10 |
|---|
| power system specs | Power pack: | - | Nominal Capacity: | - | Maximum Capacity: | - | Charger type: | - | Charging time (normal): | - | Charging time (quick): | - | Range: | - |
|---|