autoevolution
 

HONDA NR 750 (1987-1992) Specs, Performance & Photos

Segment: Sport / Super Sport
Production years: 1987, 1988, 1989, 1990, 1991, 1992

HONDA NR 750 1987-1992

The Honda NR was a V-four motorcycle that started its life in 1979 with the NR 500 Grand Prix racer powered by an engine with oval pistons, allowing eight valves per cylinder, generating more power.

In the 1980s, a 750cc endurance motorcycle was manufactured under the NR 750 designation, and in 1992, 300 street versions were produced, powered by a 90-degree v-angle engine. It was the most expensive production motorcycle then, sold for $50,000.

In 1992, the Japanese motorcycle maker launched the Honda NR 750, a sports motorcycle dressed in a full fairing. It was the most technologically advanced and the most expensive bike at the time.

Visually, the motorcycle packed standard features, such as a full fairing, a single headlight unit, a windscreen, a single seat with a hump instead of a passenger seat, an under-seat exhaust system, and five-spoke alloy wheels.

For suspension, the motorcycle packed a 45 mm inverted telescopic fork on the front with preload, compression, rebound adjustability, and 120 mm wheel travel. A Pro-Link swingarm with a single shock absorber handled the rear end.

As for the braking power, the bike's magnesium wheels were fitted with two 310 mm rotors clamped to four-piston calipers on the front and a 220 mm rotor tied to a dual-piston caliper.

Regarding power, the 1992 Honda NR 750 had its heartbeat set by a 750cc four-stroke V-four liquid-cooled engine that delivered 125 hp at 14,000 rpm and 66 Nm (49 lb-ft) torque at 11,000 rpm.

HONDA NR 750 1987-1992

HONDA NR 750 750

engine specs
Type:Four-stroke, V-four oval cylinder, DOHC, liquid cooled
Displacement:750 cm3
Bore X Stroke:3.0x1.7 in OR 76 mm
Compression Ratio:-
Horsepower:125/14000 KW(hp)/RPM
Torque:49/11000 lb-ft/RPM OR 66/11000 Nm/RPM
Fuel System:Injection
transmission specs
Gearbox:6-speed, manual
Clutch:Wet Multi-Plate
Primary Drive:-
Final Drive:Chain
chassis specs
Frame:Twin-spar beam frame in reinforced extruded aluminium
Front Suspension:45 mm, inverted, telescopic fork, preload-adjustable, 120 mm travel
Rear Suspension:Pro-Link swingarm, single shock
Front Brake:Double disc
Rear Brake:Single disc
dimension specs
Overall Length:-
Overall Width:-
Seat Height:-
Wheelbase:-
Ground Clearance:-
Weight:348 lbs OR 158 kg
Fuel Capacity:-
tyres specs
Front:-
Rear:-
power system specs
Power pack:-
Nominal Capacity:-
Maximum Capacity:-
Charger type:-
Charging time (normal):-
Charging time (quick):-
Range:-
  report a mistake on this page