autoevolution
 

HONDA DN-01 (2008-2009) Specs, Performance & Photos

Segment: Sport Touring
Production years: 2008, 2009

HONDA DN-01 2008-2009 16 Photos
HONDA DN-01 (2008-2009)HONDA DN-01 (2008-2009)HONDA DN-01 (2008-2009)HONDA DN-01 (2008-2009)HONDA DN-01 (2008-2009)HONDA DN-01 (2008-2009)HONDA DN-01 (2008-2009)HONDA DN-01 (2008-2009)HONDA DN-01 (2008-2009)HONDA DN-01 (2008-2009)HONDA DN-01 (2008-2009)HONDA DN-01 (2008-2009)HONDA DN-01 (2008-2009)HONDA DN-01 (2008-2009)HONDA DN-01 (2008-2009)HONDA DN-01 (2008-2009)

The Honda DN-01 was a cruiser motorcycle manufactured by Honda from 2008 to 2010. The bike was presented at the 2005 Tokyo Motor Show and released into the market in 2008 in Japan and in 2009 in the American Market. It was discontinued at the end of 2010.

In addition to the Honda VFR1200F, CTX700, NC700/750, 2018 Goldwing, NM4, Yamaha FJR1300AE, and Aprilia Mana 850, the DN-01 was also delivered with an automatic transmission.

In 2008, the Japanese motorcycle manufacturer introduced the Honda DN-01, a cruiser motorcycle fitted with an automatic transmission with two ride modes, "D" drive and "S" sport, and a six-speed push-button for manual mode.

The bike's appearance was characterized by standard features, such as a half fairing with an aggressive shark-looking design, a small windscreen, a two-piece dual seat, dual headlights, rider floorboards, and ten-spoke alloy wheels.

Power-wise, the 2008 Honda DN-01 had its soul brought to life by a 680cc four-stroke V-twin liquid-cooled engine, boasting 61 hp at 7,500 rpm and 64 Nm (47 lb-ft) torque at 6,000 rpm, pushing the cruiser to a top speed of 183 kph (114 mph).

The bike was kept on the safe side by two 296 mm brake discs mounted on the front wheel and a 276 mm brake disc on the rear wheel. The front was clamped to three-piston calipers, while the rear was tied to a dual-piston caliper.

HONDA DN-01 2008-2009

HONDA DN-01 680

engine specs
Type:52° V-Twin liquid-cooled
Displacement:680 cm3
Bore X Stroke:3.18 X 2.59 in OR 81 mm
Compression Ratio:10.0:1
Horsepower:61/7500 KW(hp)/RPM
Torque:47/6000 lb-ft/RPM OR 64/6000 Nm/RPM
Fuel System:PGM-FI electronic fuel injection
transmission specs
Gearbox:HFT continuously variable, hydromechanical two-mode automatic with six-speed manual mode
Clutch:-
Primary Drive:-
Final Drive:Shaft
chassis specs
Frame:A semi-double cradle; steel box section
Front Suspension:41 mm telescopic fork with 4.2 inches travel
Rear Suspension:Pro Arm single-side swingarm with single shock, seven-position spring preload adjustability; 4.7 inches travel
Front Brake:ABS and CBS with dual full-floating 296mm discs and three-piston calipers
Rear Brake:ABS and CBS with single 276mm disc and three-piston caliper
dimension specs
Overall Length:82.3 in OR 2090 mm
Overall Width:30.5 in OR 775 mm
Seat Height:27.2 in OR 691 mm
Wheelbase:63.2 in OR 1605 mm
Ground Clearance:7 in OR 178 mm
Weight:595 lbs OR 270 kg
Fuel Capacity:4 gallons OR 15.1 L
tyres specs
Front:130/70 ZR17 radial
Rear:190/50 ZR17 radial
power system specs
Power pack:-
Nominal Capacity:-
Maximum Capacity:-
Charger type:-
Charging time (normal):-
Charging time (quick):-
Range:-
  report a mistake on this page