autoevolution
 

HONDA CRF450X (2007-2008) Specs, Performance & Photos

Segment: Enduro/Offroad
Production years: 2007, 2008

HONDA CRF450X 2007-2008
HONDA CRF450X (2007-2008)

The Honda CRF was a series of off-road, trail, and dual-sport motorcycles manufactured and marketed by Honda since 2000. It succeeded the Honda CR series and comprised models with different engine displacements.

One of which was the 2007 Honda CRF450X, an off-road motorcycle in the last production year as part of the first generation, followed by the 2008 model, which was the first model of the second generation.

The 2007 model year was the third consecutive production year. It was in the same shape and form as previous ones, featuring the same characteristics without any modifications whatsoever. The 2007 Honda CRF450X was sold at an MSRP of $7,400.

It also packed the same standard features as previous ones, such as a high-mounted front fender, an inverted fork with slider covers, a single seat, a single exhaust system with a high-mounted silencer, a silencer cover, a dual-sided swingarm, and wire-spoke wheels with off-road rubbers.

As for power, the 2007 Honda CRF450X got its muscles from a 449cc four-stroke liquid-cooled single-cylinder engine mounted at its core. It boasted 45 hp at 7,500 rpm and 43 Nm (32 lb-ft) torque at 7,000 rpm.

The riding characteristics were set by a 47 mm fully adjustable cartridge-type Showa fork on the front with 315 mm of travel and a Pro-Link swingarm tied to an adjustable Showa shock absorber on the rear with 315 mm of travel.

HONDA CRF450X 2007-2008

HONDA CRF450X 449

engine specs
Type:Liquid-cooled single-cylinder four-stroke, Unicam, four-valve
Displacement:449 cm3
Bore X Stroke:3.8x2.4 in OR 97 mm
Compression Ratio:12.0:1
Horsepower:0/0 KW(hp)/RPM
Torque:0/ lb-ft/RPM OR 0 Nm/RPM
Fuel System:Keihin 40mm flat-slide carburetor with Throttle Position Sensor (TPS)
transmission specs
Gearbox:Wide-ratio five-speed
Clutch:Wet multi-disc, manual
Primary Drive:-
Final Drive:#520 T-ring-sealed chain; 13T/51T
chassis specs
Frame:Aluminium
Front Suspension:47mm inverted Showa cartridge fork with 16-position rebound and 16-position compression damping adjustability; 12.4 inches travel
Rear Suspension:Pro-Link Showa single shock with adjustable spring preload, 17-position rebound damping adjustability and compression damping adjustment separated into low-speed (13 positions) and high-speed (3.5 turns); 12.4 inches travel
Front Brake:Single 240mm disc with twin-piston caliper
Rear Brake: Single 240mm disc
dimension specs
Overall Length:-
Overall Width:-
Seat Height:37.9 in OR 963 mm
Wheelbase:58.2 in OR 1478 mm
Ground Clearance:13.6 in OR 345 mm
Weight:269 lbs OR 122 kg
Fuel Capacity:1.9 gallons OR 7.2 L
tyres specs
Front:80/100-21
Rear:110/100-18
  report a mistake on this page