autoevolution
 

HONDA CR125R (2006-2007) Specs, Performance & Photos

Segment: Enduro/Offroad
Production years: 2006, 2007

HONDA CR125R 2006-2007
HONDA CR125R (2006-2007)

In 2006, the Japanese motorcycle manufacturer released the Honda CR125R, an off-road motorcycle with the same shape and form as the previous one, packing the same characteristics without any changes.

The latest revision occurred in 2005, when the motorcycle received an all-new engine that had been reshaped, retooled, and rearmed, including a new cylinder, piston, crankshaft, and exhaust system.

The Honda CR was a series of two-stroke off-road motorcycles manufactured by Honda from 1973 to 2007. These motorcycles were racing motorcycles, with many wins in the 125, 250, and 500 motocross classes.

The first generation of Honda CR motorcycles was named after Lake Elsinore, CA, an annual motorcycle race hosted in the early 1970s. The series comprised models with displacements ranging from 60 to 500cc.

Standard features complemented the visual department, such as a high-mounted front fender, a single seat, a single exhaust system with a silencer mounted high on the right-hand side, a dual-sided swingarm, and wire-spoke wheels with off-road tires.

For performance, the 2003 Honda CR125R had a 125cc two-stroke single-cylinder liquid-cooled engine mounted under the fuel tank. It was managed by a 38 mm Mikuni TMX carburetor and assisted by a five-speed manual gearbox.

In the power department, the 2006 Honda CR125R had installed a 125cc two-stroke single-cylinder liquid-cooled engine mounted under the fuel tank. It was managed by a 38 mm Mikuni TMX carburetor and assisted by a five-speed manual gearbox.

HONDA CR125R 2006-2007

HONDA CR125R 125

engine specs
Type:liquid-cooled single-cylinder two-stroke with RC valve
Displacement:125 cm3
Bore X Stroke:2.1x2.1 in OR 53 mm
Compression Ratio:8.6:1
Horsepower:0/- KW(hp)/RPM
Torque:0/- lb-ft/RPM OR 0 Nm/RPM
Fuel System:38mm Mikuni TMX carburetor with throttle position sensor
transmission specs
Gearbox:5 speed, manual, close ratio
Clutch:Wet multi-disc, manual
Primary Drive:-
Final Drive:#520 chain; 13T/52T
chassis specs
Frame:third-generation twin-spar aluminum
Front Suspension:46mm inverted Kayaba cartridge fork with 18-position rebound and 20-position compression damping adjustability; 12.0 inches travel
Rear Suspension:Pro-Link Kayaba single shock with spring preload, 30-position rebound damping adjustability, and compression damping adjustment separated into low-speed (18 positions) and high-speed (two turns); 12.5 inches travel
Front Brake:Single 240mm disc with twin-piston caliper
Rear Brake:Single 240mm disc
dimension specs
Overall Length:-
Overall Width:-
Seat Height:37.3 in OR 947 mm
Wheelbase:57.9 in OR 1471 mm
Ground Clearance:13.8 in OR 351 mm
Weight:197 lbs OR 89 kg
Fuel Capacity:2 gallons OR 7.6 L
tyres specs
Front:80/100-21
Rear:100/90-19
  report a mistake on this page