autoevolution
 

BETA Evo 80 Jr (2012-2013) Specs, Performance & Photos

Segment: Trial
Production years: 2012, 2013

BETA Evo 80 Jr 2012-2013
BETA Evo 80 Jr (2012-2013)

The EVO or EVO 4T were trial motorcycles created by Beta Motor to compete in the world trials. It was presented at the 2008 EICMA show, released into production in 2009, and intended to replace the Beta REV.

The EVO range was available in several displacements and designations, like the 125 2t, 200 2t, 250 2t and 4t, 290 2t, 300 2t, and 300 4t. In addition, the maker made available a smaller version intended for the youngest among riders, with an 80cc displacement. It was suited for youth riders with a minimum age of six.

In 2012, the Italian trial motorcycle maker released the Bet Evo 80 Jr, a small trial motorcycle created especially for youth and beginner riders who wanted to start their life on two wheels. The bike was manufactured in 2009 and was part of the same family as the Beta Minitrial. In 2012, the bike was available at an MSRP of $3,999.

As for the visual department, the small trial motorcycle had fittings such as a front fender mounted close to the wheel, a single seat, an up-swept rear fender, a single exhaust system with the silencer mounted under the rear fender, and wire-spoke wheels with off-road tires.

In the power department, the 2012 Beta Evo 80 Jr had installed an 80cc two-stroke single-cylinder liquid-cooled engine fed by a Dell'Orto carburetor. The engine was assisted by a six-speed transmission, while a final chain drive delivered the power to the rear wheel.

BETA Evo 80 Jr 2012-2013

BETA Evo 80 Jr 79

engine specs
Type:Single cylinder, 2-stroke, liquid-cooled
Displacement:79.6 cm3
Bore X Stroke:1.9x1.7 in OR 48 mm
Compression Ratio:14:7:1
Horsepower:/ KW(hp)/RPM
Torque:0/- lb-ft/RPM OR 0 Nm/RPM
Fuel System:DellOrto 21mm
transmission specs
Gearbox:6-speed
Clutch:wet multi-disc, manual
Primary Drive:-
Final Drive:chain
chassis specs
Frame:steel
Front Suspension:33mm Paioli
Rear Suspension:Single shock, adjustable dampening & spring preload
Front Brake:175mm rotor with 4-piston caliper
Rear Brake:150mm rotor with twin-piston caliper
dimension specs
Overall Length:-
Overall Width:-
Seat Height:24.4 in OR 620 mm
Wheelbase:47.6 in OR 1209 mm
Ground Clearance:11.8 in OR 300 mm
Weight:132 lbs OR 60 kg
Fuel Capacity:0.7 gallons OR 2.6 L
tyres specs
Front:Trial type 19
Rear:Trial type 17
  report a mistake on this page