autoevolution
 

BENELLI Tre-K 1130 Amazonas (2011-2012) Specs, Performance & Photos

Segment: Adventure
Production years: 2011, 2012

BENELLI Tre-K 1130 Amazonas 2011-2012
BENELLI Tre-K 1130 Amazonas (2011-2012)

The Benelli Tre-K 1130 was a motorcycle produced by Benelli from 2006 until 2015. The bike was structurally based on the Tornado Naked Tre (TNT) and was set in motion by the same three-cylinder engine.

In 2007, the maker introduced a more off-road-oriented version, created to tackle any terrain and road, which was manufactured until 2014. Over its production years, the bike remained unchanged, featuring new color schemes.

In 2011, the Italian motorcycle maker released the Benelli Tre-K 1130 Amazonas, a motorcycle in its fifth consecutive production year. It features the same characteristics as the previous one, except for a new Military Green color scheme.

In the performance department, the 2011 Benelli Tre-K 1130 Amazonas had installed a 1,130cc four-stroke three-cylinder liquid-cooled engine underneath its fuel tank, boasting 123 hp at 9,000 rpm and 115 Nm (85 lb-ft) torque at 6,250 rpm.

A six-speed gearbox controlled by a wet multi-disc clutch sent the power generated by the engine to the rear axle via a final chain drive, pushing the motorcycle to a top speed of 224 kph (139 mph).

Its frame was designed to handle every shock in any situation, the new position of the radiator allowed high thermal exchanges at low speed and off-road use, and the rear end was designed to guarantee the best stability, comfortability, and suspension reaction.

BENELLI Tre-K 1130 Amazonas 2011-2012

BENELLI Tre-K 1130 Amazonas 1130

engine specs
Type:liquid-cooled, four-stroke, transverse three cylinder, DOHC, 4 valves per cylinder
Displacement:1130 cm3
Bore X Stroke:3.5x2.4 in OR 89 mm
Compression Ratio:11.5:1
Horsepower:123/9000 KW(hp)/RPM
Torque:85/6250 lb-ft/RPM OR 115/6250 Nm/RPM
Fuel System:EFI
transmission specs
Gearbox:6-speed, manual
Clutch:wet multi-disc, manual
Primary Drive:-
Final Drive:chain
chassis specs
Frame:steel, aluminium
Front Suspension:50mm Marzocchi upside-down fork
Rear Suspension:adjustable mono-shock
Front Brake:dual 320mm discs, 4-piston calipers
Rear Brake:single 220mm disc, 2-piston caliper
dimension specs
Overall Length:86.6 in OR 2200 mm
Overall Width:33.5 in OR 851 mm
Seat Height:33.1 in OR 841 mm
Wheelbase:60.2 in OR 1529 mm
Ground Clearance:6.7 in OR 170 mm
Weight:459 lbs OR 208 kg
Fuel Capacity:5.8 gallons OR 22.0 L
tyres specs
Front:110/80 ZR19
Rear:150/70 ZR17
  report a mistake on this page